Infinix Smart 10 X6725 Anti-Crack Fix File Free Download

Infinix Smart 10 X6725 Anti-Crack Fix

Complete Solution Using TSM Tool - Fix Anti-Crack issues on your Infinix device

Infinix Smart 10 X6725 Anti-Crack Fix

Complete Solution Using TSM Tool

UniSoc T616 Security Restore TSM Tool Anti-Crack Fix

⚠️ Anti-Crack Issue Solution

The Infinix Smart 10 X6725 with UniSoc T616 chipset may display an "Anti-Crack" error after unsuccessful flashing attempts or security breaches. This guide provides a complete solution using TSM Tool to restore the security file and fix the device.

📋 Requirements

• TSM Tool installed on your Windows PC
• Infinix Smart 10 X6725 device
• USB Cable (preferably original)
• Proper USB Drivers for Infinix devices
• Battery charged to at least 50%

🔧 Step-by-Step Fix Guide

1 Prepare Your Device

Power off your Infinix Smart 10 completely. If the device is stuck on Anti-Crack screen, force shutdown by holding the power button for 15-20 seconds.

2 Open TSM Tool

Launch TSM Tool on your computer. Wait for the interface to load completely.

3 Select UniSoc Option

From the main menu, select the UniSoc option. This will open the UniSoc-specific flashing interface.

4 Choose Correct Chipset

Select chip T616 - 64 from the dropdown menu. This is crucial for proper communication with your device.

5 Connect Your Device

Press and hold the Volume Down button on your Infinix Smart 10 while connecting it to the computer via USB cable. Keep holding until the device is detected.

6 Restore Security File

Click on the Restore Security File option in TSM Tool. This will repair the damaged security partitions causing the Anti-Crack error.

7 Start the Process

Click the Start or Flash button to begin the security restoration process. Do not disconnect the device during this process.

8 Wait for Completion

The process will take 2-5 minutes to complete. You will see a success message when finished.

9 Reboot Device

Disconnect your device and power it on normally. The Anti-Crack error should now be resolved.

⚠️ Important Notes

Note: This process will erase all user data on the device. Backup your important files before proceeding if possible.

• Ensure you have stable power supply during the process
• Use original USB cable for reliable connection
• Install proper Infinix USB drivers before starting
• If the process fails, try using different USB port or cable
• Some TSM Tool versions may have slightly different interface

💻 Download Resources

TSM Tool Infinix USB Drivers Security Files Video Guide

System Requirements: Windows 7/10/11 (64-bit recommended), 4GB RAM minimum

❓ Frequently Asked Questions

Q: What causes the Anti-Crack error on Infinix devices?

A: The Anti-Crack error usually appears when the device's security partitions are damaged or modified, often due to failed flashing attempts or unauthorized modifications.

Q: Will this process erase my data?

A: Yes, restoring security files typically requires a full partition rewrite, which will erase all user data on the device.

Q: What if TSM Tool doesn't detect my device?

A: Ensure you have installed proper Infinix USB drivers, try different USB ports/cables, and make sure the device is in the correct mode (Volume Down + Connect USB).

Q: Can I use other tools besides TSM?

A: While TSM Tool is recommended for this specific fix, other tools like ResearchDownload or MauiMeta may also work, but the steps would be different.

#InfinixSmart10 #AntiCrackFix #TSMTool #UniSocT616 #X6725Fix #SecurityRestore #InfinixRepair #MediatekFix