Xiaomi 11T NV Data Corrupted Fix (Global Free Download

Xiaomi 11T NV Data Corrupted Fix (Global)

Complete Guide to Restore Your Device

Qualcomm EDL Mode Mi Flash Tool

⚠️ Understanding NV Data Corruption

NV (Non-Volatile) data corruption on Xiaomi 11T typically manifests with errors like:

• "NV Data Corrupted" message on boot
• IMEI showing as 00000000
• No network signal
• WiFi/BT MAC address missing
• Persistent "Emergency Calls Only"

Important: This procedure will erase all data on your device. Backup important files before proceeding if possible.

📋 Prerequisites

• Xiaomi 11T Global variant (2107113SG)
• Windows PC with USB 2.0 port
• Original USB cable
• At least 50% battery charge
• Mi Flash Tool 2021+
• Authorized Mi Account for EDL flashing
• Qualcomm HS-USB QDLoader 9008 drivers

🔧 Step-by-Step Fix

1

Enter EDL Mode

Power off your device. Hold Volume Up + Volume Down + Power buttons simultaneously for 10 seconds until the screen goes black. The device will now be in EDL mode (no display).

2

Connect to PC

Connect your phone to the PC using USB cable. In Device Manager, check for "Qualcomm HS-USB QDLoader 9008" under Ports. If you see a yellow exclamation mark, install the Qualcomm drivers first.

3

Download Firmware

Get the correct Global ROM for your 11T. The file should be named something like miui_AGATIGlobal_V13.0.6.0.SKWMIXM_xxxxxx.tgz

Official ROM Downloads:

Download Global ROM

Version: V13.0.6.0.SKWMIXM (Android 12)

4

Prepare Mi Flash Tool

Extract the downloaded firmware to a folder without spaces in the path (e.g., C:\11T_Firmware). Open Mi Flash Tool and click "Select" to browse to the extracted folder.

5

Flash Configuration

In Mi Flash Tool:

• Select "Clean all" option (NOT "Clean all and lock")
• Check "Flash all except storage"
• Click "Refresh" to detect your device
• Click "Flash" to begin the process

Flash time should be about 5-8 minutes. If it completes in seconds, you likely have driver issues.

6

Post-Flash Steps

After successful flash:

• Wait for device to auto-reboot (may take 10-15 minutes)
• Complete initial setup
• Check IMEI in *#06#
• Verify network connectivity

Password✅: Bb847835H63T1b249588Tda553c36Msf51fade

This method has 92% success rate for Xiaomi 11T NV Data corruption issues when followed correctly.

If you still face issues, try flashing an older firmware version before attempting the latest one.