POCO X6 Pro Flash + IMEI + Mi Account + MDM Bypass File (Free Download)

POCO X6 Pro Dead Fix + IMEI Restore + Mi Account + MDM Bypass

Tested No Root Free

Facing a dead POCO X6 Pro after flashing? Here's your one-stop solution for fixing a dead boot, restoring IMEI, bypassing Mi Account lock, and even handling MDM lock using key partitions and tested methods.

💥 What Happened?

I flashed my POCO X6 Pro with an incompatible image, and the device became totally dead — not even detected in the PC. After trying multiple ways, flashing just preloader_raw_a.bin revived it instantly.

🔧 Fix Components Included

• Preloader_raw_a.bin — Revives dead boot
• persist.img (Modified) — Bypasses Mi Account lock
• IMEI Backup — For restoring your original IMEI
• proinfo File — For bypassing MDM lock via firmware patch

⚠️ Only use the IMEI file for restoring your own phone’s IMEI. Don’t clone or use others' IMEI — it's illegal and can brick the device.

🧠 Mi Account Bypass Method

Just replace the persist.img from official firmware with the one included in this package before flashing. It disables Mi Account lock without any tool.

Recommended Tools: SP Flash Tool, Hydra, UMT, or any MTK-supported flasher that allows partition-wise flashing.

📁 Flashing & Bypass Tips

• Use only tools that support single partition flashing
• Do NOT flash full firmware again if phone is revived
• Flash only persist.img for Mi Lock Bypass
• Restore IMEI via QCN/Meta only if wiped

🛡️ MDM Lock Bypass via proinfo Replacement

If your POCO X6 Pro is MDM locked, here's a proven method to bypass it using the proinfo replacement technique.

📝 Steps to Follow:

• Download the MDM File
  Use the link provided. Save it somewhere easy to find on your PC. Remember the password: saadgsm786.
• Download the Official Firmware
  Get the latest stable firmware for POCO X6 Pro. You’ll need it to replace one internal file before flashing.
• Replace the proinfo File
  Inside the firmware package, navigate to the modem folder. Delete or rename the original proinfo file, then copy-paste the proinfo file from the MDM package you downloaded.
• Flash the Modified Firmware
  Open your flashing tool (like Mi Flash Tool), load the firmware folder (with your replaced file), connect your phone in fastboot mode, and begin flashing.
• Restart Your Device
  After flashing is complete, your phone will reboot. The MDM lock will be gone — simple as that.

⚠️ Make sure the firmware version you use matches your device variant. Flashing the wrong firmware can result in a hard brick.

🚀 Download Files

File: POCO-X6Pro-Flash-Fix-Package.zip
Size: 17.2 MB
Password: saadgsm786

Download Now

🔄 You can also try OMH OTA Disabler Tool if your device is already in Debugging Mode.