Samsung Galaxy A14 5G - A145P U4 OS14 Scatter Firmware [Dead Boot Repair]

If your Samsung Galaxy A14 5G (A145P) is dead, stuck on logo, or not booting after flash, this guide will help you recover it using the correct Scatter Firmware and SP Flash Tool.

📦 What You’ll Need:

• Windows PC or Laptop
• Samsung Galaxy A14 5G A145P Scatter Firmware (OS14, U4)
• SP Flash Tool
• MTK USB Drivers
• USB Cable

🛠 Step-by-Step Instructions

1. Install MTK USB Drivers
   - Download & install MTK drivers.
   - Restart your computer.
2. Download and Extract the Firmware
   - Use 7-Zip or WinRAR to extract.
   - Locate files like scatter.txt, preloader, etc.
3. Open SP Flash Tool
   - Load the scatter.txt file.
   - Uncheck "preloader" (optional for safety).
   - Click Download.
4. Connect Your Device
   - Turn off phone completely.
   - Hold Volume Up + Volume Down and plug in USB.
   - Flashing will begin automatically.
5. Wait and Reboot
   - Flashing process takes a few minutes.
   - Once done, disconnect and reboot phone.
   - Device will boot into Android 14.

🎉 Firmware Installed Successfully! ✅

💡 Notes:
- For Galaxy A14 5G (A145P) U4 bootloader only.
- Flashing at your own risk – always backup.
- Use original USB cable and stable PC.

📥 DOWNLOAD FIRMWARE